Dry Block Heaters from MRC. We offer an exemplary and diverse range of dry block heaters designed to accommodate various interchangeable heating blocks. Dry block Heaters achieve precise temperature stability and uniformity for a broad range of laboratory applications.
Dry Baths For Test Tubes And Bottles
The convenient method of keeping test tubes, syringes and vials at a constant temperature and in a comfortable way It is by blocks dry bath, a compact device that does not take up space in the laboratory desktop like an incubator or water bath And allows rapid entry and exit of test tubes.
Dry baths are suitable for test tubes from 0.5 ml to 100 ml, the same bath can be used for several Sizes of test tubes by replacing the inner block, the inner block is made of aluminum and is an excellent heat conductor.
It is possible to produce blocks adapted to test tubes and vials with non-standard diameters according to customer requirements. The dry bath allows heating up to 150 degrees Celsius and even up to 200 degrees Celsius (BOD REACTOR)
Types of Dry Block Heaters:
-Bath with a single block or with two blocks 4 blocks for heating large amounts of test tubes.
-Bath with a cooling system that allows cooling up to 0 degrees Celsius.
-Bath with gas manifold and the possibility of injecting gas into each test tube during the process.
-Bath with a shaker that allows shaking and mixing the test tubes while heating or heating/cooling.
-Bath with a temperature programmer that allows producing a temperature profile of rising rates and temperature residence times.
-Baths with high blocks designed for heating extra-long test tubes.
Uses Dry Block Heaters
Food laboratories Activation of enzymes
-Petrochemical laboratories Melting point analyzes.
-Biotechnology Conversions in Bacteriology.
-Medicine, control clinics in controlled heat.